Quartz Tester Horotec ® Pulse MSA19.106 - HT33

HOROTEC® PULSE MSA19.106 is an electronic device for testing the electronic parts (coil/circuit) of analogic quartz watch movements.

This device captures the impulses issued from the coil of the quartz movement. When a signal is detected, the green diode lights and the device beeps.

Delivered with 1 battery 9 V and multi-lingual operating instructions.

OPERATING The device captures the impulses issued from the coil of the quartz movement. When a signal is detected, the green diode lights and the device beeps.

INSTRUCTIONS FOR USE 

1. Place the watch or the watch movement to check on the central area of the device. 
2. Press briefly on the red ON button ; the yellow diode lights up and indicates that the device is ready for use. If the yellow diode does not light, please change the battery 9V. The device will automatically switch off after 2 minutes. Some watches give impulses each 20 or 30 seconds, so please wait for the signal. If HOROTEC ® Pulse is not capturing any signal after 20 or 30 seconds, please try to change the watch battery. 
3. Repeat the test from point 1. If the device captures impulses from the watch and the hands do not turn, it means that the electronic parts are functioning well and the defect comes from the mechanical parts (wheel train, blocked hands). 
4. Try to unlock the wheel train with the HOROTEC® Turbo. 
5. Start again the test(point 1). If the device captures impulses and the hands are turning, the watch is functioning correctly. If the device does not capture any signal, please try to change completely the watch movement.

60mm x 105mm x 28mm.

“Horotec product you want? Ask us for it" [email protected]