Bezel Removing Plier Universal For Rotating Watch Bezels - HPE305300
Brand: Techniwatch
Sorry, this item is currently not in stock.
If you would like us to let you know when this item comes back into stock, please enter your email address below.
VERY EASY TO USE, THIS PLIERS CAN REMOVE MOST ROTARY BEZELS ON THE MARKET.
With the use with optional multi-function vice (Our Ref. HVE305400) this was designed to ensure safe operation, providing a large handle. Its two jaws, made from synthetic material, enable you to hold watch heads via their horns, without scratching them.
The pliers are equipped with a versatile elastomer for all bezel diameters ranging from Ø30mm to Ø50mm, to provide a superior grip. There is a limit stop to prevent crushing the bezel after extraction.
This solution is without doubt the most efficient on the market.
Size: 105 x 205 x 19 mm (pliers)
Weight: 270g
Technical specifications:
Elastomer with two lips, suitable for rotary bezels of Ø30mm to Ø50mm.
RECOMMENDATIONS:
For a wristwatch, it is possible to do without the optional vice (Our Ref. HVE305400), but the operation will not be as easy.
If you have removed the bracelet, position the case middle on the vice after choosing the right jaw shape for the horns.
Close the vice firmly
Use your other hand to hold the pliers, and slide the lip between the bezel and case middle. Choose the side of the pliers according to the bezel diameter.
Clamp the pliers slightly, and turn them so that the bezel rotates through approximately a ¼-turn.
During this operation, it is important to apply a radial twist with the vice.
REPLACING ELASTOMER AND JAWS:
The elastomer is replaced using a 1.5 mm Allen key
The jaws can be turned and screwed in using a mechanic's flat-bladed screwdriver.
Related products
